Friday, April 12, 2013

Steinway M 252119 pinblock fit and installed

When installing a new pinblock, it is necessary to fit the block not only to the plate, but also into the piano. A Steinway pinblock is a full fit, which means it must be the exact size to fit in the piano, tight on both sides and tight to the stretcher. The original pinblock is used as a pattern for cutting the new pinblock from a blank panel, and for determining the starting thickness. After cutting the blank it needs to be fit to the plate. I fit the pinblock not only to the face of the plate, but also to the web of the plate. When the pinblock has been fit to the plate, it is ready to be fit into the rim of the piano. With the pinblock attached to the plate, the plate must also be set to the correct height and location front to back, and side to side. Now that the pinblock is fit and installed, I can proceed with the bridge work.

No comments:

Post a Comment