Baldwin F Soundboard Completed

After the new soundboard is glued into the piano, there are several finishing touches that need to be completed. Usually there is a trim piece of wood that is glued into the piano along the straight side of the case. I use cauls and multiple clamps to achieve a good glue joint. Next, the edge of the board needs to be trimmed along the belly rail. The board is left slightly proud in the front so that a perfect edge can be achieved in this area when finishing. Finally the piano and bridge tops are masked and final top coats of lacquer are applied to the top side of the soundboard. It's time again to stop and reflect and enjoy the satisfaction of another completed task.