Well, a lot has happened since my last post. I have been very busy with tuning work in addition to shop work, so I just haven't had time to write. The board was pressed several weeks ago, the bridge work was completed, and the bridges were attached to the board. After the bottom of the board was sprayed, it was glued into the piano.
The pinblock was drilled to receive the tuning pins, and the plate was refinished before being installed over top the pinblock and soundboard/bridge assembly. The piano then is ready to have all new strings and tuning pins installed.
After being strung, The dampers will be reinstalled with new felts, and the action work will be completed. More on that later.
